Author: admin

17 Jun

How to plasti dip a car

In this article we will teach  you how to add a unique look to your vehicle using plasti dip. What is plasti dip? It is a substance used for vehicles and wheels  to protect their initial surfaces in the winter season. It is a product of  a high quality which  is resistant to cold,  salt, winter ice or  sun fading. It is also a reliable though removable stuff that will slough off  after a long period of time. The most important thing is that you can use it to show a matte and clean appearance for your vehicle whereas completely continuing to be free of harm.

plasti dip

The plasti dip is such a covering that forms a separate layer any surface, even car rims.

The first thing you should do is to find a suitable place. The area should be large enough to contain the vehicle and is ventilated well. It may be an open garage, though if you have no such opportunity, a good place may be out-of-doors somewhere in the shade is.

You should clean and wash the surface properly. The surface must be very clean before putting any type of plasti dip to the vehicle.

Of course, the surface MUST be not only cleat but dry as well. After having cleaned the surface, dry it with a cloth. Do not use  paper towels. These may create scratches.

Then shake the can with spray vigorously. Shake it for about  1 minute.

Then paint in segments.  For instance, apply the first layer to the roof, while it is drying, apply the  first layer to the hood and so on. You may start from any section you wish. Avoid touching  plasti dip on a vehicle at any point during it is drying not to have any mispainted spots. It is safe to touch after solidification. You are recommended to put on  eye protection and a mask.

It is very significant for the first layer to be a light dusting because this layer is the bonding one. That  means it will be a 50 -60% transparence. This will let the next layers stick to the paint. Plasti dip should dry approximately15-30 minutes  before applying the next layer

Then apply some more layers. The more layers the more  longevity of plasti dip. In the whole the amount of layers is 4 or 5.

After the last layer is added, instantly remove all painter’s tape that you  have used to protect areas from being covered with plasti dip. You should do  before the substance dries.

Then you will need about 4 hours to wait until plasti dip fully cure.

You can also use plasti dip for applying on  car accessories.

If you want to plasti dip rims, the cleanest and easiest way is to remove the wheels from the vehicle. Find out instructions on how to remove wheels from your BMW X5, Dodge, Hundai or Audi and follow them properly. It is fully voluntary to coat the wheels’ rubber since plasti dip is simply removable. Do not forget that the surface you want to plasti dip should be clean.


17 Jun

How to Enhance Your car’s Horsepower

Car owners are generally more eager to make gas mileage better and save some money than to increase performance. If you wish to let out your car’s inner hot rod, you can do it in different ways. Reading these tips you will be able enhance the horsepower as well as maximize the speed and performance.

increase horsepower with performance

The first step is to reduce the weight of the vehicle. The easiest way to do right now for increasing the horsepower is making your car as light as possible. You should get rid of all unnecessary clutter from your vehicle and also strip your car down as much as possible for the best performance.

The second step is upgrading to a free-flowing exhaust system. If you upgrade to a high-performance exhaust system it will increase your car’s horsepower by a degree of 5-10 on some natural aspiration cars (like Ford Mustang).

It’s a general misunderstanding that oversized piping influences back pressure negatively ,as a result you lose power and low-end torque. Actually, the most part of engines choose rather the most free-flowing system, from the standpoint of header, intake and exhaust.

The next step is using test piping. First of all you should measure the diameter of your catalytic converter’s pipe and then replace with bigger exhaust piping. Probably you can have it installed at the shop paying some money, or you can do it yourself. For this purpose you should cut the old exhaust piping and leave several inches to weld onto.
Also you need to buy a free-flow aftermarket air filter. It should fit your car and be installed to slightly enhance your HP. This change is not very big, but it’s a very good way to make sure that your car will be working at the highest-possible degree.

Bear in mind that in fact a lot of after-market air filters will let larger particulate matter pass into the oil filters and engine, mainly if maintained wrong, and consequently will spray oil into the intake. As a result the mass air flow sensor can be damaged or even destroyed by the oil from the filter.

For the further increasing your car’s horsepower study supercharge and turbocharge options. If you install a turbocharger in a smaller-block or a supercharger in a large-block engine, you will save a lot of money because it will rebuild your engine completely and basically upgrade the stress-bearing components of it.

If you are going to install a supercharger in your vehicle , you should consider the following variations:

The oldest type of supercharger system are root superchargers. They are generally the cheapest and very popular among racing cars.

Twin screw superchargers are designed to pull air through lobes, which becomes compressed in a cone-shaped tapering appliance and trapped in the rotor housing. They are illegal in almost all states and they tend to be exceedingly loud.

There are some more types of superchargers and turbocharges. You can find some information on the Internet or check Kijiji options and choose BMW X5, Nissan Juke, Audi Q2 or other crossovers to increase their horsepower. It is also possible to increase horsepower of sedans and hatchbacks.